ARM: JTAG COMMUNICATION ERROR (2 Replies)
Hi, I'm working on LPC2148 controller with keil_513 uvision IDE, and run through the example code and the JTAG communication was good,and the code dumped, then when again I tried to dump the code it...
View ArticleARM: mbed export to keil (2 Replies)
Hello, I try a sensor project in mbed plateform, i run it and it's work very well. So i export the project to Keil Uvision 5 and when i build it i have this error : .\build\Sensors_Reader.axf: Error:...
View ArticleARM: Unable to Debug with STM32F407G-Disc Board in Keil 32KB limited edition...
Hi, I am using STM32F407G-Disc1 board i have purchased recently from element14, When i try to compile and the example program IO_Toggel, 1) Program never gets flashed into the Controller. 2) When i...
View ArticleARM: Cortex-m4 mass storage implementation is too much slow compared to...
Hi all, I'm developing on at91SAM3S/4s. I have 2 keil projects sharing the same source code since the 2 core are similar. The base of my project is USB mass storage sample from keil 4.7 for sam3s-ek...
View ArticleARM: accessing memory-mapped peripherals with C (2 Replies)
hi i defined a peripheral at 0x59000000 address and am trying to send a value to that register with my c code i succeeded to send a value with assembly AGAIN LDR R1, =0x59000000 LDR R0, =0x00000022...
View ArticleNone: ulinkpro -d outputs a jtag-reset about every 5-10 seconds (uvision is...
I started having this problem this morning. I was single stepping through a program when the board reset to start. This continues to happen. I traced it down to the debugger connector pin 15 which is...
View ArticleARM: SD Card CLASS Restriction (1 Replies)
We am using MCBSTM32C Keil Evaluation Board and MDK-ARM Realtime Library. This board accepts only SD Card of CLASS 2. Nowadays it is difficult to get CLASS 2 Memory card in the market. What are the...
View ArticleARM: TM4C123GH6PM PLL SIMULATION IN uVision4 (1 Replies)
I was trying to simulate a simple LED toggle application in TM4C123GH6PM using Keil uVision4 Simulator with PLL (80MHz). It was configured to use an external crystal of 16Mhz. The code with PLL is not...
View ArticleARM: Keil.STM32F4xx_DFP.2.9.0.pack download problem (1 Replies)
Hi I have a problem to download Keil.STM32F4xx_DFP.2.9.0.pack The message is: <Error><Code>BlobNotFound</Code><Message>The specified blob does...
View ArticleARM: [Keil uVision] Debug Functions for STM32F4 (Cortex-M4)
Hi, I would like to write debug/signal functions for my STM32F429I discovery board. Unfortunately the Debugger complains with "undefined identifier" for any input or output register, e.g. S0IN or...
View ArticleARM: PWM program in Keil for FRDM-KL46Z board (3 Replies)
I have written a code for blinking LED using PWM. But it is not working. Kindly help me to find the error with this code. #include "MKL46Z4.h" int main() { // Set multiplexer to connect TPM0 Ch5 to...
View ArticleARM: .\Obj\STM32_FD_USART.axf: Error: L6405E: No .ANY selector matches...
hello Dear! when i build my code, "Error: L6405E: No .ANY selector matches xxx.x ." massage is appear. please. why that error is coming? and what i do, that solve?
View ArticleARM: GUI not working after update Keil Middleware to 7.1.0
Hello All, After updated the middleware from 7.0.0 to 7.1.0, the GUI is not working, but others(USB, file system) are working well. Can I only update the USB and file system and remain the old GUI?
View ArticleARM: can any one give me an open source project with cmsis rtx?
hi to all i am new in cmsis::rtx rtos and i want to know how it can help me to make better my future project,so can any one give me an open source project that use cmsis::rtx in order to give me...
View ArticleARM: Inline Assembly from an assembly file into a C++ function (1 Replies)
Hi, I need to : 1. Inline an assembly code that modifies Stack pointer directly (__asm directive is not allowed to modify stack pointer) in a C++ file. What is the best option? A function call to a...
View ArticleC51: C51: Start_XC.A51 compiled wrong in 9.55?? (2 Replies)
Hi, I've tried to compile the same project originally developed with version 9.51 under the latest 9.55. The two .hex files are identical except for one byte. Looking at the .map and at the...
View ArticleNone: Setting Signals to Inactive Threads
I have couple questions regarding setting signals to inactive threads using RTX and CMSIS. Please see the example code below: osThreadId thread_id = osThreadCreate(osThread(thread_body), NULL); /* set...
View ArticleARM: Solid Wod Bedroom F-u--n-i-t-u-r-e Cheap
Solid Wod Bedroom F-u--n-i-t-u-r-e Cheap Go to so lid wo dbedscouk.
View ArticleNone: S.o.l.i.d W.o.o.d B.e.d Frame King Size
S.o.l.i.d W.o.o.d B.e.d Frame King Size Go to w'-w'-w'-s'-o'-l'-!'-d'-w'-o'-o'-d'-b'-e'-d'-s'-c'-o'-u'-k'-.
View ArticleC51: c++.c(17): error C141: syntax error near '}' THIS ERROR SHOWN PLZ HELP...
#include<AT89X51.h> void delay(unsigned int); void main(void) { P1_1=0; /* unset pin # 1*/ P1_2=0; /* unset pin # 2*/ /* bring delay*/ delay(300); P1_1=1; /* set pin # 1*/ P1_2=1; /* set...
View Article